Baron Footrest & Controls_ENGINE GUARD Yamaha V-Star Manuel d'utilisateur télécharger pdf

Page: 1BA-7112-00

ENGINE GUARD - Yamaha V-Star 950

We recommend you read all instructions fully before starting. Use Loctite®

on all threaded hardware. Cover your front fender to protect it from damage

prior to installing Engine Guard.

Revision: 2.9 - 07/27/2010

Install Time: 20 to 30 minues

INCLUDED IN THE KIT:

(1) 3/8"-16 x 2.25" Socket Cap Screw Chrome

(2) 3/8" Flat Washer Chrome

(1) 3/8-16 Nylock Nut

(1) Mounting Plate

(1) Engine Guard

TOOLS REQUIRED:

Assorted Metric & SAE Wrenches & Sockets

INSTRUCTIONS:

NOTE: For an easier install we recommend two people perform this installation.

1. Using a 14mm socket remove the floorboard mounting bolts from the left and right rider floorboards and let

them hang.

2. Insert the Engine Guard and align the mount holes of the lower brackets against the frame with the

floorboard mounting holes. Lift and align the floorboard mounts with the brackets and frame. Insert the stock

mounting bolts and thread them to snug, but do not tighten at this time.

3. Push the cross flange at the top of the Engine Guard up against the down tubes. Place the black mount plate

against the backside of the down tubes.

4. Install the flat washer under the head of the 3/8-16 x 2.25" bolt and insert it through the cross flange and

through the mount plate. Install the second flat washer on the bolt, then thread the nylock nut on the bolt and

snug, but do not tighten at this time.

5. Align the Engine Guard to center it on the down tubes and then tighten the upper bolt fully, while keeping

the mount plate square.

6. Tighten the mounting bolts on the left and right floorboard mount fully.

RECOMMEND: Re-tighten all hardware after riding 100 miles.

Our install guides provide a basic outline on the proper installation of our products. Further tuning and/or

fitment may be required. Barons bears no responsibility on installation costs associated with this product.

5221 Oceanus Drive Huntington Beach, CA 92649 (925)583-2499 - Ph. (714)901-0520 - Fax www.baronscustom.com [email protected]

Page: 1BA-7112-00 1

Résumé du contenu

Page 1 - Page: 1BA-7112-00

Page: 1BA-7112-00ENGINE GUARD - Yamaha V-Star 950We recommend you read all instructions fully before starting. Use Loctite®on all threaded hardware. C

Plus de documents pour Pour les motocyclettes Baron Footrest & Controls_ENGINE GUARD Yamaha V-Star

Voir le document Baron Footrest & Controls_ENGINE GUARD Yamaha V-Star Manuel d'utilisateur

Baron Footrest & Controls_ENGINE GUARD Yamaha V-Star Manuel d'utilisateur (1 pages)

Commentaires sur ces manuels

Pas de commentaire

Baron Footrest & Controls_ENGINE GUARD Yamaha V-Star Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour les motocyclettes Baron Footrest & Controls_ENGINE GUARD Yamaha V-Star. Baron Footrest & Controls_ENGINE GUARD Yamaha V-Star 950 User Manual Manuel d'utilisatio

Résumé du contenu

Plus de documents pour Pour les motocyclettes Baron Footrest & Controls_ENGINE GUARD Yamaha V-Star

Commentaires sur ces manuels

Produits connexes et manuels pour Pour les motocyclettes Baron Footrest & Controls_ENGINE GUARD Yamaha V-Star