Baron Fenders & Body Kits_GANGSTER FRONT FENDER Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour les motocyclettes Baron Fenders & Body Kits_GANGSTER FRONT FENDER. Baron Fenders & Body Kits_GANGSTER FRONT FENDER User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 1
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Page: 1BA-9120-0X
Baron Fiberglass Fenders
Revision: 1.2 - 07/26/2010
INCLUDED IN THE KIT:
(4) M8 Serrated Flange Nut (1) Front Fender
INSTRUCTIONS:
1. Pre-fit all fenders BEFORE you paint them.
2. Fenders can be trimmed/cut with a cutoff tool or dremel.
3. Check clearance on lowered rear suspensions with the rear fully collapsed.
4. Check front fender for corner clearance, forward control clearance, tool bag clearance.
5. Check rear caliper for clearance (rear caliper can be relocated on some models).
6. Check tire clearance.
7. Are you frenching-in lights or license? Check the clearance.
8. Drill any holes you need for seat mounting, pillion brackets, luggage mounting, light mounting, fender
trim, rear racks, license mounting, etc. prior to painting.
9. Sand gel coat with 320 grit and prime.
10. Finish sand primer with 400 wet/dry paper and apply base coat.
Note: Pre mount fender before you paint!
Our install guides provide a basic outline on the proper installation of our products. Further tuning and/or
fitment may be required. Barons bears no responsibility on installation costs associated with this product.
© 2013 Barons Custom Accessories
5221 Oceanus Drive Huntington Beach, CA 92649 (925)583-2499 - Ph. (714)901-0520 - Fax www.baronscustom.com [email protected]
Vue de la page 0
1

Résumé du contenu

Page 1 - Baron Fiberglass Fenders

Page: 1BA-9120-0XBaron Fiberglass FendersRevision: 1.2 - 07/26/2010INCLUDED IN THE KIT:(4) M8 Serrated Flange Nut (1) Front FenderINSTRUCTIONS:1. Pre-

Commentaires sur ces manuels

Pas de commentaire