Baron Engine Guards_ENGINE GUARD Honda VTX 1800 C & Manuel d'utilisateur télécharger pdf

Page: 1BA-7150-00B

Yamaha Bolt Engine Guard

CAUTION! We Strongly recommend that a qualified Technician install this

kit should you not fully understand the instructions prior to starting the

install. For questions contact our tech dept. via email or phone # listed below.

Revision: 1.0 - 11/04/2013

Install Time: 20 Minutes

INCLUDED IN THE KIT:

(3) M10 x 1.25 x 40mm Hex Flange Bolts Black Zinc

(2) M10 x 1.25 x 75mm Hex Flange Bolts Black Zinc

(1) M10 Lock Washer Black Zinc

(1) Gloss Black Powdercoated Mount Bracket

INSTRUCTIONS:

Note: This installation is much easier if performed with at least one assistant.

1. Secure bike on jack.

2. Remove (4) M10 bolts securing the left and right foot controls.

3. Slide the engine guard into place. This is much easier to do if you have one or two people to hold the guard

in place. If you are trying to do this install yourself, you will need some support blocks (2x4s work well) to

support the weight of the guard while you secure it to the frame.

4. Secure the long mount tabs of the engine guard between the foot controls and the frame. Red loctite is

recommended for all bolts used in this installation. The M10x1.25x75mm bolts are used on the right side

and 2 of the M10x1.25x40mm bolts are used on the left side. Leave the bolts slightly loose.

5. Next, using the supplied bracket and remaining M10x1.25x40mm bolt and lock washer, secure the top

bracket of the engine guard to the frame.

6. Tighten all the hardware to complete the installation.

You must re-tighten all engine guard mounting bolts after 100 miles of riding!

Our install guides provide a basic outline on the proper installation of our products. Further tuning and/or

fitment may be required. Barons bears no responsibility on installation costs associated with this product.

5221 Oceanus Drive Huntington Beach, CA 92649 (925)583-2499 - Ph. (714)901-0520 - Fax www.baronscustom.com [email protected]

Résumé du contenu

Page 1 - Yamaha Bolt Engine Guard

Page: 1BA-7150-00BYamaha Bolt Engine GuardCAUTION! We Strongly recommend that a qualified Technician install thiskit should you not fully understand t

Commentaires sur ces manuels

Pas de commentaire

Baron Engine Guards_ENGINE GUARD Honda VTX 1800 C & Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour les motocyclettes Baron Engine Guards_ENGINE GUARD Honda VTX 1800 C & . Baron Engine Guards_ENGINE GUARD Honda VTX 1800 C & F User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour les motocyclettes Baron Engine Guards_ENGINE GUARD Honda VTX 1800 C &