Baron Footrest & Controls_SHORT BOARD, ENFERNO - H-D Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour les motocyclettes Baron Footrest & Controls_SHORT BOARD, ENFERNO - H-D. Baron Footrest & Controls_SHORT BOARD, ENFERNO - H-D Models User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 1
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Page: 1BA-7093-xx
HD SHORTBOARD MOUNTSHARLEY DAVIDSON - FL
Touring Models - 1993-08
CAUTION! We Strongly recommend that a qualified technician install this kit
if you do not fully understand the instructions prior to beginning the install.
Revision: 1.0 - 02/22/2010
INCLUDED IN THE KIT:
(1) Baron Comfort Kit (BA-7090-05)
(4) Stainless Socket Set Screw
(4) 5/16" Stainless Shims
(2) Black Powder Coated Baron Floorboard Mounts
(10) Chrome Caps
(4) M8 Stainless Cap Head Bolts
(4) 5/16" x1" Stainless Shoulder Bolts
(2) Chrome Baron Shortboards (solid or enferno)
TOOLS REQUIRED:
Pliers (std. and needle nose)
6mm Allen Wrench
HD Shop Manual
Phillips and Flat Screwdrivers
3/32" & 5/32" Allen Wrenches
INSTRUCTIONS:
1. Lift the rubber on the stock passenger board and using a punch or small Phillips screwdriver, push the pins
out that hold the board to the mount. Be careful not to lose the ball bearing & spring.
2. Remove stock passenger floorboard mount.
3. Follow instructions included with the Baron Comfort Kit. These are required when using the Baron
Shortboards.
4. Using the M8 Stainless Cap Head Bolts, install the Baron Floorboard Mount onto the bottom of the board in
the desired position (this position can be adjusted later if its not to your liking).
5. Once you are sure of the position, insert the Stainless socket set screw into each of the threaded holes.
6. Insert the spring into the hole on the factory floorboard mount. Replace the ball bearing on top of this spring
making sure you do not lose it.
7. Insert the Baron Shortboard and Mount into the stock floorboard mount location. Secure with 5/16" x 1"
Stainless shoulder bolts and blue Loctite. Make sure to use the stainless shims between the head of the bolt and
the mount.
8. Make any adjustments to the board location.
9. Once the location is satisfactory, go over all bolts, making sure you tightened them to factory specifications.
Our install guides provide a basic outline on the proper installation of our products. Further tuning and/or
fitment may be required. Barons bears no responsibility on installation costs associated with this product.
© 2013 Barons Custom Accessories
5221 Oceanus Drive Huntington Beach, CA 92649 (925)583-2499 - Ph. (714)901-0520 - Fax www.baronscustom.com [email protected]
Vue de la page 0
1

Résumé du contenu

Page 1 - Touring Models - 1993-08

Page: 1BA-7093-xxHD SHORTBOARD MOUNTSHARLEY DAVIDSON - FLTouring Models - 1993-08CAUTION! We Strongly recommend that a qualified technician install th

Commentaires sur ces manuels

Pas de commentaire